GK-ken

cover

Bild_2026-05-09_144400744.png

Bild_2026-05-09_144407655.png

plate_1.png

ab71e275f2f2465f.png

<h2>Print Settings</h2><ul><li>Material: PLA</li><li>Layer Height: 0.20 mm</li><li>Initial Layer: 0.25 mm</li><li>Walls: 2</li><li>Infill: 10% Adaptive Cubic</li><li>Supports: Tree Supports (Auto)</li><li>Brim: 5 mm</li><li>Top Layers: 5</li><li>Bottom Layers: 3</li><li>Nozzle Temp: 220°C</li><li>Bed Temp: 55°C</li><li>Outer Wall Speed: 200–350 mm/s</li><li>Inner Wall Speed: 400 mm/s</li><li>Top Surface Speed: 200–300 mm/s</li><li>Initial Layer Speed: 150 mm/s</li><li>Travel Speed: 500 mm/s</li></ul><p>Optimized for fast PLA printing with easy support removal and approximately 40 minute print time.</p>

0.2mm layer, 2 walls, 10% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Freddy+Tobi

4-way WAGO holder for DIN rail one direction

4Fach WAGO-Halter für Hutschiene eine Richtung

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this remix and it helps your setup, a Boost is always appreciated. Thanks for the support.</boostcontent></boostme><p>Optimized remix of the original 4-way WAGO DIN rail holder for faster and cleaner PLA printing.</p><p>Changes in this remix:</p><ul><li>Reduced print time to around 40 minutes</li><li>Easier support removal</li><li>Improved DIN rail snap clip geometry for better flexibility and durability</li><li>Optimized material usage while maintaining strength</li><li>Reliable fit on standard 35 mm DIN rails</li></ul><p>Designed specifically for efficient PLA printing with clean results and dependable mounting performance.</p><p>Ideal for:</p><ul><li>Electrical cabinets</li><li>Home automation</li><li>DIY electronics</li><li>Workshop organization</li><li>WAGO 221 connector management</li></ul><h2>Recommended Print Settings</h2><ul><li>PLA</li><li>0.20 mm layer height</li><li>15–20% infill</li><li>Supports: Build plate only</li><li>0.4 mm nozzle</li><li>3 walls</li></ul><h2>Tested With</h2><ul><li>WAGO 221 connectors</li><li>Standard 35 mm DIN rails</li></ul>

4-Way WAGO Holder Fast PLA DIN Clip Remix

ASIA

Print Profile(1)

Description

Recommended Print Settings

Tested With

Comment & Rating (0)

This remix is based on

License

Related Models