LayerForge

cover

IMG_20260509_090232.jpg

IMG_20260509_090238.jpg

IMG_20260509_090243.jpg

IMG_20260509_090251.jpg

IMG_20260509_090258.jpg

plate_1.png

fb73a9d7aa496bcd.png

<p><strong>Nome profilo:</strong> PLA 0.2mm Standard – P2S</p><p>&nbsp;</p><p><strong>Stampanti compatibili:</strong> Bambu Lab P2S, X1C, P1S, P1P, A1, A1 Mini</p><p>&nbsp;</p><p><strong>Materiale:</strong> PLA</p><p>&nbsp;</p><p><strong>Test di stampa:</strong> Modello stampato e verificato con successo su Bambu Lab P2S con questo profilo.</p><p>&nbsp;</p><p><strong>Descrizione del profilo:</strong></p><p>Il profilo è configurato su layer height 0.20mm con il processo standard Bambu Lab P2S, bilanciando tempi di stampa ragionevoli e resa del dettaglio sulla texture organica del pelo. Con 2 perimetri e infill al 10% in grid il modello risulta sufficientemente rigido pur contenendo il consumo di materiale. I 5 top shell garantiscono una chiusura superiore uniforme anche sulle superfici curve. I supporti Tree Organic con angolo soglia a 30° sono stati scelti specificamente per gestire la geometria complessa delle braccia e degli artigli con il minimo impatto sulle superfici esposte; non è consigliabile sostituirli con supporti normali.</p><p>&nbsp;</p><p>La stampa è stata eseguita su piatto BiQu CryoGrip con profilo filamento Bambu PLA Matte.</p><figure class="table"><table><thead><tr><th>Parametro</th><th>Valore</th></tr></thead><tbody><tr><td>Layer height</td><td>0.20 mm</td></tr><tr><td>Initial layer height</td><td>0.20 mm</td></tr><tr><td>Ugello</td><td>0.4 mm</td></tr><tr><td>Perimetri</td><td>2</td></tr><tr><td>Top shells</td><td>5</td></tr><tr><td>Bottom shells</td><td>3</td></tr><tr><td>Infill</td><td>10% – Grid</td></tr><tr><td>Supporti</td><td>Tree Organic (auto), soglia 30°</td></tr><tr><td>Piano</td><td>BiQu CryoGrip</td></tr></tbody></table></figure>

<p><strong>Profile name:</strong> PLA 0.2mm Standard – P2S</p><p>&nbsp;</p><p><strong>Compatible printers:</strong> Bambu Lab P2S, X1C, P1S, P1P, A1, A1 Mini</p><p>&nbsp;</p><p><strong>Material:</strong> PLA</p><p>&nbsp;</p><p><strong>Print test:</strong> Model successfully printed and verified on Bambu Lab P2S with this profile.</p><p>&nbsp;</p><p><strong>Profile description:</strong></p><p>The profile is configured with a 0.20mm layer height using the standard Bambu Lab P2S process, balancing reasonable print times and detail rendition on the organic fur texture. With 2 perimeters and 10% grid infill, the model is sufficiently rigid while minimizing material consumption. The 5 top shells ensure a uniform top closure even on curved surfaces. Tree Organic supports with a 30° overhang threshold were specifically chosen to manage the complex geometry of the arms and claws with minimal impact on exposed surfaces; it is not advisable to replace them with normal supports.</p><p>&nbsp;</p><p>The print was executed on a BiQu CryoGrip plate with a Bambu PLA Matte filament profile.</p><figure class="table"><table><thead><tr><th>Parameter</th><th>Value</th></tr></thead><tbody><tr><td>Layer height</td><td>0.20 mm</td></tr><tr><td>Initial layer height</td><td>0.20 mm</td></tr><tr><td>Nozzle</td><td>0.4 mm</td></tr><tr><td>Perimeters</td><td>2</td></tr><tr><td>Top shells</td><td>5</td></tr><tr><td>Bottom shells</td><td>3</td></tr><tr><td>Infill</td><td>10% – Grid</td></tr><tr><td>Supports</td><td>Tree Organic (auto), 30° threshold</td></tr><tr><td>Plate</td><td>BiQu CryoGrip</td></tr></tbody></table></figure>

0.2mm layer, 2 walls, 10% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Uno dei personaggi più iconici e selvaggi di tutta la Terra di Mezzo, finalmente in versione stampabile in casa. 🏔️</p><p>&nbsp;</p><p>Beorn non è un semplice orso: è un mutaforma, un guardiano, una forza della natura. </p><p>&nbsp;</p><p>Pensato per i collezionisti della serie <strong>Lo Hobbit</strong>, gli appassionati di Tolkien e chiunque voglia arricchire la propria collezione fantasy con una pezzo davvero fuori dal comune. 🧙</p><p>&nbsp;</p><h4>🖨️ Compatibilità</h4><ul><li><strong>Stampanti testate:</strong> Bambu Lab P2S</li><li><strong>Stampanti compatibili:</strong> Bambu Lab X1C, P1S, P1P, A1, A1 Mini</li><li><strong>Ugello testato:</strong> 0.4mm</li><li><strong>Materiale testato:</strong> PLA Matte</li></ul><h4>📐 Specifiche Tecniche</h4><figure class="table"><table><thead><tr><th>Parametro</th><th>Valore</th></tr></thead><tbody><tr><td>Parti</td><td>2 (corpo + base circolare)</td></tr><tr><td>Altezza corpo</td><td>~228 mm</td></tr><tr><td>Larghezza corpo</td><td>~122 mm</td></tr><tr><td>Profondità corpo</td><td>~105 mm</td></tr><tr><td>Base – diametro</td><td>~139 mm</td></tr><tr><td>Base – spessore</td><td>~5.6 mm</td></tr><tr><td>Altezza assemblata</td><td>~234 mm</td></tr><tr><td>Connessione</td><td>Pin di allineamento (maschio/femmina)</td></tr><tr><td>Layer height</td><td>0.20 mm</td></tr><tr><td>Pareti</td><td>2 perimetri</td></tr><tr><td>Infill</td><td>10% – Grid</td></tr><tr><td>Top shells</td><td>5 strati</td></tr><tr><td>Bottom shells</td><td>3 strati</td></tr><tr><td>Supporti</td><td>✅ Sì – Tree Organic (auto)</td></tr><tr><td>Brim</td><td>Auto</td></tr><tr><td>Piano di stampa</td><td>BiQu CryoGrip</td></tr><tr><td>Materiale testato</td><td>PLA Matte</td></tr></tbody></table></figure><h4>💡 Consigli di Stampa</h4><ul><li>🐾 <strong>Stampa i due pezzi separatamente</strong> — il corpo e la base sono già orientati correttamente nel file 3MF.</li><li>🌳 I supporti <strong>Tree Organic</strong> gestiscono ottimamente le zone critiche (braccia, artigli) riducendo le tracce sulle superfici visibili</li><li>🎨 Il <strong>PLA Matte</strong> esalta ogni dettaglio della texture del pelo e si presta benissimo alla pittura a mano con acrilici — consigliato anche PETG per maggiore robustezza.</li><li>📌 I <strong>pin di allineamento triangolare</strong> garantiscono un accoppiamento preciso base–corpo. Verificare se la tolleranza della vostra stampa è adatta altrimenti carteggiare un minimo i pin della base. Consiglio un po&#39; di colla cianoacrilica per fissare la statuetta sulla base</li><li>❄️ Lascia raffreddare completamente entrambi i pezzi prima di assemblare per evitare tensioni.</li></ul><p>&nbsp;</p><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Se Beorn ha conquistato un posto sulla tua scrivania, lascia un like ❤️ e considera di fare un boost per aiutare la serie a crescere, ogni supporto conta davvero. 🙏</boostcontent></boostme>

<p>One of the most iconic and wild characters in all of Middle-earth, finally in a home-printable version. 🏔️</p><p>&nbsp;</p><p>Beorn is not just a bear: he is a shapeshifter, a guardian, a force of nature. </p><p>&nbsp;</p><p>Designed for collectors of <strong>The Hobbit</strong> series, Tolkien enthusiasts, and anyone who wants to enrich their fantasy collection with a truly unique piece. 🧙</p><p>&nbsp;</p><h4>🖨️ Compatibility</h4><ul><li><strong>Printers tested:</strong> Bambu Lab P2S</li><li><strong>Compatible printers:</strong> Bambu Lab X1C, P1S, P1P, A1, A1 Mini</li><li><strong>Nozzle tested:</strong> 0.4mm</li><li><strong>Material tested:</strong> PLA Matte</li></ul><h4>📐 Technical Specifications</h4><figure class="table"><table><thead><tr><th>Parameter</th><th>Value</th></tr></thead><tbody><tr><td>Parts</td><td>2 (body + circular base)</td></tr><tr><td>Body height</td><td>~228 mm</td></tr><tr><td>Body width</td><td>~122 mm</td></tr><tr><td>Body depth</td><td>~105 mm</td></tr><tr><td>Base – diameter</td><td>~139 mm</td></tr><tr><td>Base – thickness</td><td>~5.6 mm</td></tr><tr><td>Assembled height</td><td>~234 mm</td></tr><tr><td>Connection</td><td>Alignment pins (male/female)</td></tr><tr><td>Layer height</td><td>0.20 mm</td></tr><tr><td>Walls</td><td>2 perimeters</td></tr><tr><td>Infill</td><td>10% – Grid</td></tr><tr><td>Top shells</td><td>5 layers</td></tr><tr><td>Bottom shells</td><td>3 layers</td></tr><tr><td>Supports</td><td>✅ Yes – Tree Organic (auto)</td></tr><tr><td>Brim</td><td>Auto</td></tr><tr><td>Print bed</td><td>BiQu CryoGrip</td></tr><tr><td>Material tested</td><td>PLA Matte</td></tr></tbody></table></figure><h4>💡 Printing Tips</h4><ul><li>🐾 <strong>Print the two parts separately</strong> — the body and base are already correctly oriented in the 3MF file.</li><li>🌳 <strong>Tree Organic</strong> supports handle critical areas (arms, claws) optimally, reducing marks on visible surfaces</li><li>🎨 <strong>PLA Matte</strong> enhances every detail of the fur texture and is very suitable for hand-painting with acrylics — PETG is also recommended for greater robustness.</li><li>📌 The <strong>triangular alignment pins</strong> ensure a precise base-body fit. Check if your print's tolerance is suitable, otherwise lightly sand the base pins. I recommend a bit of cyanoacrylate glue to fix the figurine to the base</li><li>❄️ Let both parts cool completely before assembling to avoid tension.</li></ul><p>&nbsp;</p><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If Beorn has earned a spot on your desk, leave a like ❤️ and consider giving a boost to help the series grow, every bit of support truly counts. 🙏</boostcontent></boostme>

Print Profile(1)

Description

🖨️ Compatibility

📐 Technical Specifications

💡 Printing Tips

Comment & Rating (0)

License

Related Models

Parameter	Value
Parts	2 (body + circular base)
Body height	~228 mm
Body width	~122 mm
Body depth	~105 mm
Base – diameter	~139 mm
Base – thickness	~5.6 mm
Assembled height	~234 mm
Connection	Alignment pins (male/female)
Layer height	0.20 mm
Walls	2 perimeters
Infill	10% – Grid
Top shells	5 layers
Bottom shells	3 layers
Supports	✅ Yes – Tree Organic (auto)
Brim	Auto
Print bed	BiQu CryoGrip
Material tested	PLA Matte

Beorn | Bear Form - The Hobbit