Wet Wipe Box: Weighted, One-Handed Dispenser

Keep one hand on your wiggly kid (or muddy pets), while using the other to grab a wipe without a tug-of-war with the wipe pack. Only requires one additional item: weights, or modeling clay, or anything heavy that fits in the donut.

Required to purchase: something heavy. I used 1oz tire weights found on amazon. I like a satisfying thud when I place the donut over the opening, so I used 16 of these 1-ounce weights stuck inside the donut (1lb in total). I've also seen modeling clay as a cheap 3D printing weight option (or pennies, BBs, anything that fits).

Optional item: 8mm adhesive rubber feet to fit in the punchouts on the base. These provide the grip for a true one-handed pull on smooth surfaces.

The donut ‘hole’ for the wipe is a 115mm x 75mm oval. I've tested Pampers and Target's Up&UP brand wipes. Based on those dimensions it looks like Cottonelle, Kirkland and possibly Dude Wipes would also fit. Only recommended for packages that are resealable.

Print settings recommendations:

• PETG or, if printing PLA, I recommend using an auxiliary fan deflector or turn down your fan (in filament settings) to prevent warping on the large flat base.
• Matte PLA looks great (as pictured), but feel free to try any color variations with the single-color print profile.