Clamps / Brackets for G6 Mount Multifunctional Arm

This is the C clamps and L brackets for Ubiquiti G6 Instant cameras. It allows G6 cameras to be attached to the multifunctional arm system. 

Related

The images shown include the clamps and brackets for multifunctional arm pieces to mount the Unifi G6 Instant to Multifunctional Arm. These pieces are only needed if you wish to mount them in the same assembly shown in the picture. If you choose to mount them differently, these pieces are not required. The actual Unifi G6 Instant adapter is at Unifi G4 / G6 Instant Mount to Multifunctional Arm

Features

• Designed with two types of L brackets. 
  • Use the outward facing L bracket to lean the G6 Instant camera forward (more forward)
  • Use the inward facing L bracket so that the G6 center of gravity is right above the clamp (more stable)
• Compatible with the Multifunctional Arm system by Jakub Lattenberg
• Printable without AMS
• No support needed when printed at 0.08mm layer height

Instructions

1. Print either the inward or outward facing L brackets.
2. Print the remaining pieces and the Unifi G4 / G6 Instant Mount to Multifunctional Arm
3. Assemble the pieces

Remix

This model is made possible by the Connection and Connection with Thread step files, part of the Multifunctional Arm system created by Jakub Lattenberg which defines the interface between each of these models.