Wago 3-way Terminal XXL Storage Box
Print Profile(1)
Bill of Materials
Description
Model of a WAGO 221 terminal. I tried to create the most detailed model possible of a Wago terminal, which is functional and requires no additional materials.
I printed the side text separately and then tapped it in with a piece of wood and a small hammer. Of course, you can also print this in two colors directly on a suitable printer. You can also split the main body to avoid using some supports.
The size of the box at 100% scale: Length:21cm, Width:23cm, Height:10cm
The size of the box at 85% scale: Length:18cm, Width:19.5cm, Height:8.5cm
The size of the box at 70% scale: Length:14.7cm, Width:16cm, Height:7cm
For the printed parts, deburr the rounded edges of the joints if necessary. For assembly, lay the levers flat on the terminal, slightly compress the joints, and then push them in from the back.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)