SnapLock Ball Hook – Self-Locking Print-in-Place
Print Profile(1)
Description
🔒 No screws. No drilling. Just peel & stick.
The SnapLock Ball Hook is a clever print-in-place wall hanger that locks itself through a unique ball mechanism — the more weight you hang, the tighter it holds.
Perfect for towels, bags, keys, gym gear, and more.
✅ Print-in-Place – ball is printed together with the hook
✅ No assembly required
✅ Strong & reliable – self-locking under load
✅ Clean minimal design fits any interior
✅ Printed in PETG for durability
✅ No drilling – attaches with double-sided adhesive pads
— HOW IT WORKS —
The U-shaped frame traps the ball inside. When you hang something, the downward force presses the ball against the frame walls — locking it in place automatically.
— PRINT SETTINGS —
Material: PETG (recommended) or PLA
Layer height: 0.2mm
Walls: 2
Infill: 15%
Supports: Tree (auto), threshold 40°
Orientation: Flat back on build plate
— INSTALLATION —
1. Print the model
2. Clean the wall surface
3. Apply double-sided adhesive pads (e.g. 3M Command Strips) to the flat back
4. Press firmly against wall for 30 seconds — done!
💡 Tip: Use strong adhesive pads rated for at least 1–2 kg for best results.
Designed by Nivaroprints 🏔️ Valais, Switzerland
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)