OpenView display for 1:64 and 1:43 !

List of updates at the bottom ! 

I wanted a display that would allow for the best possible model visibility. I thought for a long time... as you can see, I have a few on my profile! ;D 

Until I came up with this! It's flawless and amazing!

Currently, there are two types:

- small for one model with an accessory

- large for one 1:43 model or a couple of 1:64 models plus any configuration

(The third one will be for HW Team Transport, which is sorely missed... ;) )

The display can be equipped with an LED. The display has a removable floor, allowing you to change the display.

There are two types: 

- clear for your own design

- paving stones for designing something in the city, e.g., a parking lot ;)

 You can install plexiglass, which will eliminate dust problems ;)

Plexiglass dimensions: 

- Small - 111mm x 85mm

- Medium - 171mm x 85mm

The displays come with a hanger for two displays and a single display.

The files also include a stand that allows you to stack two displays ;)

You'll also find ready-made backgrounds in the files. You can use your own, but I'll add them if you like mine ;)

I will develop this project as much as possible, because I like it so much! I hope you like it too! ;D

Happy printing!!!

Update : 

11.05.2026  -  I added a second hole for the LED series connection ;) 

14.05.2026  -  I added decorative walls with a brick surface

14.05.2026  -  I added a deeper version if you want to make 3D dioramas on an even higher level ;)

(By the end of the week I will have prepared decorative walls with which you can decorate the display ;) )

16.05.2026 - I added wall decorations for a deeper display ;) It is included in the "Deeper Version" file.