glock 16 round magazine extension baseplate
Print Profile(1)
Description
Boost Me (for free)
thank you for the boost and check out the other models on the page
gen 3 / 4 mags
Hardware Needed:
1x Compatible OEM Mag Body (Such as: Gen 3 G17 mag, or a Gen 4 G19 mag)
1x 33rd Extended Length Mag Spring (Preferably Wolff)
1x Standard OEM Floorplate (For compressing the mag spring when assembling/disassembling)
6x M2x10 Screws (Pan Head, preferably with the head being 4mm in diameter)
Assembly:
1) Sand with FINE grit sandpaper the inside of the extension shell, and the matching face of the
cover plate.
2) Slightly compress the mag body, and slide the extension shell on.
3) Place the OEM floorplate into it's recessed position, then slide the follower and extended mag
spring up into the mag body. Compress the spring and push the bottom coils onto the floorplate.
4) Place the cover plate on the rear of the extension shell, and drive six M3x10 screws in.
5) Load the magazine with 33 rounds, then dry cycle. Function check multiple times to ensure
proper feeding.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)