Box for 2x WAGO 221-415 - Cablemanagement - 5

Compact Junction Box for 2x WAGO 221-415 Terminals

Order and safety for your electronics projects! I have specifically designed this compact junction box to accommodate two 5-pole WAGO terminals (Type 221-415). It is perfect for crafting, model making, LED installations, or other electronics projects.

Features in Detail:

• Precise fit: The two WAGO 221-415 terminals fit firmly and precisely in their guides.
• Integrated strain relief: Two separate bridges secure the incoming and outgoing cables. They are easily fixed with one M3 screw each. If you do not need them for your project, you can simply omit them.
• Simple closure: The lid is closed with four M3 screws. The holes in the housing are precisely dimensioned so that the M3 screws securely bite into the plastic directly and without thread cutting.
• Clean cable routing: Generous openings on the end faces ensure kink-free cable entry.

Print & Assembly Recommendations

• Material: PLA or PETG
• No supports needed
• Required Hardware:
  • 4x M3 screws for the lid (length approx. 5–10 mm is completely sufficient).
  • 4x M3 screws for the strain relief.

IMPORTANT SAFETY NOTICE (Disclaimer)

Use exclusively for low-voltage applications! This enclosure has no approval or certification for use with mains voltage (e.g., 230V household installation). I expressly recommend its use only in the low-voltage range (e.g., 5V, 12V, 24V for LEDs, Arduino projects, model making, etc.). Use is at your own risk. The box is not waterproof or dustproof. I assume no liability for damages.

Do you have questions or need adaptations for other WAGO terminals (e.g., 3-pole 221-413)? Just write it in the comments – I look forward to your constructive feedback!

Have fun printing! Your Josie