19X19 Print in Place Go board
Print Profile(1)
Description
This model is quite challenging to print. I designed a 19×19 Go board meant to be printed entirely on one build plate, and the purge tower must be removed for this.
In addition, the base of the model is very large, so it is prone to warping during printing. I have uploaded the reference picture for your reference.
The model is quite big overall. It consumes about 500 grams of filament and takes a full day to finish printing. I recommend you first print the smaller 9×9 version I’ve also uploaded, and try the large one only after you’re ready.
To ensure a looser fit, set the XY outline dimensional compensation to -0.1 mm. This will make the structure fit with proper clearance.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)