V2 Handlebar Lever Shifter Height Alignment Tool
Print Profile(1)
Description
Before printing: Remember to properly calibrate your filament! Flow ratio, PA.
You can easily fix your dimmensional accuracy with my latest project:
Achieve perfect symmetry for your cockpit!
Have you ever felt like your shifters aren't at the exact same height, even if they look straight "by eye"? Pro-Aligner V2 is a dedicated tool for bike mechanics and enthusiasts that eliminates the guesswork and lets you align your hoods with millimeter precision.
🛠️ What's new in V2?
Listening to community feedback, V2 introduces key upgrades to make the tool even better:
- Central Measurement Pin: Eliminates parallax errors. The pin is now perfectly aligned with the arm's axis, making it much easier to visually assess the contact point on the shifter.
- Extended Measurement Range: The sliding arm now offers an impressive maximum reach of up to 380 mm from the center of the steerer tube, accommodating even the widest gravel and aero setups.
- Optimized for 256x256 Printers: Despite the extended reach, all parts have been strategically designed to fit perfectly on standard 256 x 256 mm build plates (ideal for Bambu Lab X1, P1, and A1 series).
- Reinforced design: Improved arm stiffness prevents the tool from flexing or sagging under its own weight.
✨ Main Features:
- Universal mounting: Mounts directly to the steerer tube, providing the most stable and accurate measurement base possible.
- Telescopic adjustment: The sliding arm easily adapts to various handlebar widths, flare angles, and stem lengths.
- Quick lock: Convenient knobs allow for instant locking of your measurements.
- The Compass Principle: Rotating the tool around the steerer axis maps out a perfectly symmetrical circle in 3D space, ensuring both shifters are positioned flawlessly.
🖨️ Print Recommendations:
- Material: PETG (highly recommended for mechanical strength and temperature resistance) or tough PLA+.
- Layer height: 0.2 mm.
- Supports: Only required main arm. Profile is prepared to use PLA as a interface layer for PETG object. If you cannot mix filaments, please tune your support settings to your setup.
🔩 Required Hardware (BOM):
- 2x M4 bolt - 20mm
- 2x M4 heatinsert - 5mm long
- 1x M6 countersink screw - can be reused from you steerer cover mount.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)