BeeWall v2 Atomizer Stand

🐝 BEE-WALL v2

Modular hexagon wall system designed for both decoration and functionality.

Each hexagon connects through a hidden interlocking system, ensuring a clean and seamless look.
The system supports additional modules such as shelves and lighting elements.

🔹 Features

• Modular design (expandable in any direction)
• Hidden interlocking connection
• Integrated LED module option
• Optional shelf attachment
• Clean, minimal aesthetic

Perfect for wall organization, decoration, or ambient lighting setups.

💨 Vape Display Modules

This version introduces dedicated vape accessory modules, designed to securely hold atomizers and small vaping components while maintaining the clean modular aesthetic of the system.

The display modules:

• integrate seamlessly into the hexagonal structure
• maintain the hidden connection system
• allow customizable layouts and expansion

Perfect for:

• vape setups
• collector displays
• desk or wall organization
• ambient decorative installations

--------- INSTRUCTIONS ---------

🔧 Connection System

The system uses a slide-based dovetail mechanism, designed to provide a strong, clean, and fully hidden connection between hexagonal modules.

Each module features:

• an integrated female guide inside the wall
• a separate male key insert that slides into the guide

🔹 How it works

Assembly is performed by inserting the key into the guide and sliding the modules laterally until fully seated.

The dovetail geometry:

• prevents front separation
• ensures precise alignment between modules
• provides structural stability, even in extended configurations

⚙️ Tolerances & Accuracy

The tolerances are optimized for a precise and stable fit on properly calibrated 3D printers.

👉 For best results, it is recommended to:

• calibrate steps/mm
• verify flow/extrusion settings
• ensure proper first layer setup
• use reliable print profiles

⚠️ Without proper calibration:

• the fit may be too tight (difficult insertion)
• or too loose (reduced stability)

💡 Usage Notes

• The system is fully modular and reusable
• The sliding motion should feel smooth but controlled
• No glue or screws are required

🔥 Tip

For wall installations or larger assemblies, it is recommended to:

• use at least one anchored module (e.g. fixed or light module)
• distribute weight evenly across the structure

🖨️ Print Settings

• Material: PLA / PETG / PETG-CF (tested)
• Layer height: 0.2 mm
• Infill: 15–25%
• Supports: Not required
• Snap-fit tolerance: 0.2 mm