Enclave Crate - Wasteland Bricks - Multicolor

💡 Collect the Full Wasteland Bricks Series on https://cults3d.com/@LayerForgeStudios

Bring the wasteland to your Namebrand-scale builds with this highly detailed, building blocks-compatible Enclave Crate. 

This model was cut for best printing on standard FDM 3D printers.

Featuring:
Namebrand-compatible proportions
Modular parts for clean assembly
Excellent detail retention at minifig/bigfig scale
Perfect fit for dioramas, MOCs, and display builds

⚠Disclaimer
This is a fan-made, original 3D model inspired by Danish Plastic Brick Manufacturer Company®
Not affiliated with or endorsed by Danish Plastic Brick Manufacturer Company® or DISNEY® & LUCASFILM LTD® Star Wars® Or Bethesda Softworks®

💡Pair this model with other Wasteland Bricks figures to build your own Fallout-inspired world!

Basic Print Settings
.08mm layer height, 10% infill, Organic Tree supports enabled, support Z Top distance set to .12
Extruder Temp 216°c
Bed Temp 45°C On Biqu Glacier Plate
Printed on BambuLab P1s With AMS 2 PRO
 

Filament: Designed for the shrinking rates of Sunlu PLA + 2.0 other materials have different shrink rates, using other filaments will cause fitting issues, breakage or dimensional errors during assembly. 

Slicer: Orca or Bambu; For Guaranteed Results - My profile is required

Temperature: keep your print room above 60°F (25°C) to prevent shrinking/warping 

Build Plate Preparation: Wash with dish soap and water, then dry thoroughly, & wipe with alcohol to ensure good adhesion
Parts may need to be scaled up or down by 1% depending on how well maintained, clean & tuned your printer is.