Eraserhead Hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 135.74x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#757575 PLA BambuLab Matte Nardo Gray Transmission Distance: 0.7
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Nardo Gray
Border Only Colors from here until the end.
At layer #21 (1.76mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)