Kai DX 2011 - Giant Brickman 500%
Print Profile(1)
Description
Bring your childhood to life with this Classic Brick DX Kai from 2011 on a massive scale Standing at 9"!
This model was cut for best printing on standard FDM 3D printers.
⚠Disclaimer
This is a fan-made, original 3D model inspired by Danish Plastic Brick Manufacturer Company®
Not affiliated with or endorsed by Danish Plastic Brick Manufacturer Company® or DISNEY® & LUCASFILM LTD® Star Wars® Or Bethesda Softworks®
3D printing settings USE PRINT PROFILE
Basic Print Settings-Advanced in .3MF
.2mm layer height, 5% Gyroid infill, Organic Tree supports enabled, support Z Top distance set to .12
Extruder Temp 210c
Bed Temp 45c, No Brim on Biqu Cryogrip Glacier
Printed on BambuLab P1S With AMS 2 PRO
Filament: Designed for the shrinking rates of Sunlu PLA + 2.0 other materials have different shrink rates, using other filaments will cause fitting issues, breakage or dimensional errors during assembly.
Slicer: Orca or Bambu; For Guaranteed Results - My profile is required
Temperature: keep your room above 60°F (25°C) to prevent shrinking/warping
Print Bed Preparation: Wash with dish soap and water, then dry thoroughly, & wipe with alcohol to ensure good adhesion
Parts may need to be scaled up or down by 1% depending on how well maintained, clean & tuned your printer is.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)