SigSauer P226 Tactical OWB Holster v2.0 Slim

Tactical holster for SigSauer P226 - full length (right)

Maybe it also fits P229?

UPDATED AND IMPROVED VERSION OF THE OLD v1.0

UPDATE: Tested with real P226 X-Five and fitment is perfect!

If it feels too tight, gently heat the inside a bit with a hairdryer and press the weapon in, it will mold itself

Different manufacturers of airsoft/replicas may have different tolerances compared to an original weapon

This is to provide a tight fit for the weapon, so it stays securely in your holster without falling out or wobbling!

This design fit perfectly for my Navy XXL X-five

The placement is higher, the trigger is at belt height, the belt loop follows the body shape better, and the forward tilt is an aggressive 15 degrees, "FBI cant" for concealed carry

My first print was 2 walls, but then the screw holes became too weak

You don't need to overtighten the 3 screws! Just pull the 2 parts together, believe me, it will hold

The screw holes follow QLS standard

The model can be mirrored in Bambu Studio if you are left-handed. However, you will need to modify the groove on the side for slide disassembly and cover the logo

You will need;

2x M5 hex screws 30mm length

1x M5 hex screw approximately 25mm long

3x M5 nuts

But be prepared that some screw lengths may need to be adjusted so they do not go too deep against your weapon