WereWolf 13 Optimized Print Profile

WereWolf 13 – Optimized Print Layout
 

This is my optimized print profile / print layout for the WereWolf 13 25% model.
 

I prepared the model for easier and cleaner printing by organizing the parts into a more practical plate setup. The frame parts are arranged on one dedicated build plate, while the armor parts and tail are arranged separately on another plate. This makes the print process easier to manage, especially when using different colors or materials for the skeleton and armor.
 

I also merged several loose STL parts into cleaner ready-to-print grouped files, so the model is easier to load, slice, and print without having to manually arrange every small part from scratch.
 

What was changed / optimized:
 

- Frame parts arranged together on one dedicated plate

- Armor parts and tail arranged on a second dedicated plate

- Several separate STL files combined into ready-to-print groups

- Improved part organization for easier printing

- Optimized layout for Bambu Studio / MakerWorld workflow

- Easier color separation between frame and armor

- Reduced manual preparation before printing

- Print-ready setup instead of only loose STL files
 

Recommended materials for the frame: PETG, ASA, or ABS.

Armor parts can be printed in your preferred color/material combination.

 

Credits / License:
_____________________________________________________________________________________________________________

This is a fan-made optimized print profile / print layout based on the original Were-Wolf 13 25% model.
 

Original credits:

- Were-Wolf 13 25% by GoldSpartan

- DUMMY 13 Printable Jointed Figure by @soozafone

- K9 - DUMMY13 Companion by TClear
 

Shared under Creative Commons Attribution–NonCommercial–ShareAlike 4.0.

Attribution is required.

Commercial use is not allowed.
 

This is not an official release from the original creators.