Azoteq TPS65 holder for Lily58

A holder for the Azoteq TPS65 Trackpad that fits the Lily58 Pro Keyboard. 

The Holder is mounted to the PCB with two pins going trough two unused holes and then being pinched between the bottom part of the case and the PCB. The trackpad is lightly pressed in but could also be glued in with double sided tape if needed.

Don't mind the missing keycap, I tried it with 3 different keycaps and the all fit without a problem, as long as the width/height is 1u. I just didn't have a spare one on hand. 

For me the corners lifted slightly, printing it on a 3d-effect print plate. I guess printing it on a SuperTack or maybe just a normal PEI plate would help.

It features space to put a voltage converter and level-shifter if required.  

I just mounted the components on a 3cm*7cm prototyping board, where I cut a part of it off.

The .step file includes the holder and the case.

The case is from JOSHCKB, here: https://cults3d.com/:571341