Usagi Yojimbo
Print Profile(1)
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out this and other TMNT prints below, available EXCLUSIVELY on Patreon!
Project: Usagi.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 187.95x235mm in size
You may print at higher layer heights below the Base Thickness of 1.84mm
The Max allowed Thickness is 4mm and the Actual Thickness is 3.68mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3
#e4bd68 PLA BambuLab Basic Gold Transmission Distance: 3
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #24 (2mm) swap to Marine Blue
At layer #26 (2.16mm) swap to Ash Gray
At layer #28 (2.32mm) swap to BambuLab Green
At layer #32 (2.64mm) swap to Sky Blue
At layer #35 (2.88mm) swap to Gold
At layer #41 (3.36mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)