Greenman water feature fountain

Bring a touch of ancient woodland charm to your garden or pond with this detailed Green Man water feature 🍃💧

Designed to be used as a decorative fountain feature, water flows naturally from the mouth and back into your pond or water feature for a relaxing effect.

For best outdoor durability, I recommend printing this model in PETG.

This model is printed in 2 halves and will require assembly using epoxy or a strong adhesive. The water jet nozzle should also be secured into the mouth opening using epoxy or similar waterproof adhesive.

For the finish shown in the photos, I apply:

• 1 coat of primer
• Several coats of stone effect paint
• Optional faux moss/weathering effects for a more aged natural look

The model can be mounted in different ways depending on your setup:
• Glued into position using a “No Nails” style adhesive
• Or hung from a screw by drilling a small mounting hole where required

Water inlet connection:

Fits standard 9mm ID x 12mm OD PVC tubing commonly available from Amazon, eBay and pond supply stores.

My own setup has this mounted above my pond with the pump hidden in the water below.

⚠️ Please note:

This is a decorative garden model intended for hobby and personal use. Depending on your printer settings and chosen material, some finishing work may be required before painting.

Happy printing! 🍃