Parametric Blu-Ray and Media Holder w/ customizer

📀 Parametric Media Case Holder 📀

Tired of stacking your blu-rays in precarious towers? Want a tidy way to display your video game collection? This fully customizable holder has you covered! 🎮💿

✨ What Is It?

A parametric holder that can be tuned to fit blu-rays, DVDs, video games, or pretty much any rectangular case you want to organize. Generate a holder for a single special edition or a full row of 12+ — it's up to you.

The default slot width is set to 13.6mm, which fits most standard blu-rays with or without slipcovers.

📏 Sizing It Right

Got something other than a standard blu-ray? No problem! Just grab a caliper or ruler, measure the thickness of your case, and pop that number into the customizer's Slot Width parameter. Done!

💡 Pro tip: Add a little wiggle room (0.5–1mm) so your cases slide in and out smoothly.

🔩 Two Versions Available

Wall-Mount Version 🧱 Comes with built-in screw holes plus counterbores for clean, recessed screw heads. Note: I recommend laying it down with the screw holes flat on the build plate in your slicer — this orientation gives you the cleanest, roundest holes and the best surface finish on the mounting face.

Shelf Version 📚 No screw holes — perfect for plopping right onto a bookshelf, desk, or media console.

Both versions are available in the customizer and as ready-to-print profiles.

⚡ Just Want to Print?

Don't want to mess with the customizer? I've included pre-made print profiles at the default 13.6mm width for both the wall-mount and shelf versions. Click, slice, print, done. ✅

🎛️ Customizer Parameters

For those who want full control, here's everything you can tweak:

• Back Wall Height — Height of the back wall of the model
• Slot Width — Opening width for each case (the big one!)
• Shelf Depth — How far out the case sits / extends from the back wall
• Slot Count — How many case openings you want (1 to as many as your printer can handle!)
• Divider Thickness — Wall thickness between slots
• Back Wall Depth — Thickness of the back wall
• Shelf Height — Height of the dividers rising up from the floor (increase for more horizontal support on heavier cases)
• Hole Diameter — Screw hole diameter (wall-mount version)
• Counterbore Diameter — Counterbore size for recessed screw heads
• Slot Radius — Corner radius on the slot cutouts (decrease for narrow slots if cutouts disappear, increase for wider slots to avoid flat edges)
• Floor Height — Thickness of the floor

🆘 Need Help?

Having trouble dialing in your dimensions or generating the holder you want? Send me a message and I'd be happy to help! I'd rather you walk away with the perfect holder than wrestle with parameters.

Happy printing! 🖨️