Triangle Fidget - Small 10 Rings - Print-in-Place
Print Profile(1)
Description
Triangle Fidget – Print-in-Place
A compact triangular fidget toy that transforms into a satisfying stepped pyramid when you pull the centre handle.
All parts print in place and move freely once the print is finished. No supports or assembly required.
The layered triangular rings telescope upward into a geometric pyramid shape, then collapse smoothly back down when released.
Designed to be:
- Fast to print
- Lightweight
- Pocket friendly
- Satisfying to fidget with
Perfect for desks, pockets, gifts, and quick print sessions.
Boost Me (for free)
A Boost is always appreciated and helps support future fidget designs ⚡
Features
• Print-in-place
• No supports required
• Expanding pyramid motion
• Compact triangular design
• Smooth collapsing action
• Lightweight print
My Other Fidgets
Click Image Below
Print Time & Filament
• Under 20 minutes
• Under 16g filament
(Varies slightly depending on printer and settings)
Print Settings
Layer Height: 0.28 mm
Supports: No
Brim: No
Infill: 10%
Wall Loops: 1
Initial Layer Speed 30 mm/s
Notes
The rings may feel slightly stiff immediately after printing. Gently move the mechanism a few times to fully loosen the action.
For best results:
- Ensure good first layer adhesion
- Use a clean build plate
- Outer Rings may separate a some angles. Easily fixed by pushing back at the same angle.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (38)