My Hero Academia - Gran Torino MHA Hueforge
Print Profile(2)
Description
Next up is another 4 color MHA entry! 😁
Sorahiko “Gran” Torino. Jet Quirk 😎🥹
Gran Torino was the perfect fit for a 4 color project. It gave me a lot of space to play with greys! This one was a lot of fun to make, I hope you all like it.
On to the print, no notes, set an forget.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #13 (1.12mm) swap to Jade White
At layer #16 (1.36mm) swap to Yellow
At layer #17 (1.44mm) swap to Red
At layer #18 (1.52mm) swap to Jade White
At layer #20 (1.68mm) swap to Black
At layer #21 (1.76mm) swap to Jade White for the rest.
Boost Me (for free)
Thank you for checking out my work! Smash the button if you like it enough 😁
Appreciate all the support and comments! Loving the pics as well! 🙏
See you on the next one!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)