John Bonham - Led Zepplin - 200x200

John Bonham the legendary drummer himself I had another version I was going to make originally with him just absolutely destroying the drums but this old photo came up of him just at peace on his kit and I was like NOPE gotta redo it for this one.

Enjoy all :) 
Project: 22.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #5b6579 PLA Bambulab Basic Blue Gray  Transmission Distance: 1.9
    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #1cd756 PLA Bambulab Basic Basic Bambu Green  Transmission Distance: 2.1
    #c3a738 PLA BambuLab Basic Gold  Transmission Distance: 3.1
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 6 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.72mm) swap to Bambulab Basic Blue Gray
    At layer #9 (0.8mm) swap to BambuLab Matte Marine Blue
    At layer #11 (0.96mm) swap to Bambulab Basic Basic Bambu Green
    At layer #16 (1.36mm) swap to BambuLab Basic Gold
    At layer #21 (1.76mm) swap to BambuLab Matte Ivory White for the rest