Justin Bieber Coachella

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 176.06x220mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #d22332 PLA+ Sunlu Red  Transmission Distance: 6
    #565d65 PLA+ Sunlu Grey  Transmission Distance: 2
    #01b3ff PLA+ Sunlu Sky Blue  Transmission Distance: 4
    #d5c2a0 PLA+ IIID Max Tan  Transmission Distance: 2.6
    #ffcaa6 PLA+ Sunlu Skin  Transmission Distance: 5
    #ffffff PLA+ Sunlu White  Transmission Distance: 2.9
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Red
    At layer #15 (1.28mm) swap to Grey
    At layer #19 (1.6mm) swap to Sky Blue
    At layer #20 (1.68mm) swap to Tan
    At layer #24 (2mm) swap to Skin
    At layer #27 (2.24mm) swap to White for the rest.