Bicycle Computer Mount (Garmin/Sigma)
Print Profile(1)
Description
The bicycle computer mount was specially developed for road bikes with 31.8 mm handlebar diameter and modern cockpits, allowing stable mounting of various bicycle computers such as Garmin, Sigma, or Wahoo.
The model is optimized for 3D printing with PETG and can be reliably and stably produced with the specified print settings.
Recommended Print Settings
- Material: PETG
- Enable tree supports
- 4 wall lines
- 100 % infill
- Print orientation as intended in the images or STL file
The solid construction and high infill create a very robust mount, also suitable for bad roads, cobblestones, or high speeds.
Required Parts
In addition to the printed component, the following parts are required:
The heat-set inserts can be easily installed with a soldering iron and ensure a stable, durable screw connection.
The mount is ideal for individual cockpit setups and can be adapted depending on the bicycle or stem.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)