Univer FR1 Digital 433Mhz replace remote cover
Print Profile(1)
Description
Description
This cover serves to replace the broken remote cover of the Univer FR1.
Specifications
- about 30 minutes to print
- uses about 15 gram of filament
- 3 walls and 6 bottom layers for robust design
- use the screws and transmitter print from broken remote
Assembly
Place the rubber buttons in position in the top section.
Because the pins are delicate, I recommend placing the transmitter circuit board over the pins of the top section first, then tilt the bottom part against it and screw it in place with the small screws.
A notch is provided for inserting a key ring.
Enjoy!
Boost Me (for free)
Thank you for the support.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)