Print Profile(1)
Description
Direct-fit replacement wheels for the Worx Landroid L robotic mower. Aggressive directional tractor tread for serious traction on grass, slopes and damp conditions — a meaningful upgrade over the factory wheels for anyone running a Landroid on real lawn rather than manicured turf.
Designed in CAD, printed in flexible Bambu TPU 95A HF, drop-in compatible with the factory hub.
Compatibility
- Worx Landroid WR150E (Landroid L, 1500 m² / ½ acre chassis)
- ⚠️ Not compatible with the Landroid M chassis (WR140 / WR141 / WR142 / WR143 and equivalents). Hub geometry differs.
Directional pair — left & right
The chevron tread is directional. The V points forwards (in the direction of travel) when correctly fitted.
The print profile contains two plates:
- Plate 1 — left-hand (LH) wheel
- Plate 2 — right-hand (RH) wheel
Print one of each. The two are mirror images, so don't substitute one for the other.
Material
- Bambu TPU 95A HF (what these were designed and tested on)
- Other 95A TPUs should work fine; softer (e.g. 85A) will deform under the mower's weight, harder won't conform to terrain
- TPU's UV resistance is reasonable for outdoor service; expect long life under intermittent sun exposure
Print settings
- Nozzle: 0.6 mm
- Layer height: 0.3 mm
- Walls: 3+ perimeters
- Infill: 25–40 % gyroid
- Supports: none required
- Print profile included — slice as-supplied and you're good.
Hub installation
The print profile has a pause layer pre-configured at the height where the hub cavity closes over.
- Pause-and-insert (preferred): Let the print run as-is. When the printer pauses, drop the OEM hub into the cavity and resume. The wheel prints over the top, fully encapsulating the hub.
- Split and glue: If you'd rather avoid the mid-print pause, slice the model into two halves at the pause height in your slicer, print each half separately, fit the hub, and bond the mating faces with cyanoacrylate.
Notes
- Original factory hubs are reused — pull them out of your worn OEM wheels.
- Free model. If you print these and they work well for you, a like, follow or print share on MakerWorld is appreciated.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)