Fox Motive Hanger / Kids Cloth Hanger

FOX hanger for cloth or bags.

Designed for 4 color AMS and color mixing. No supports needed. No glue needed.

The design is modular and the hanger motive is easily swappable with other animal motives from my motive hangers Collection. The motive clips into place.

Successfully tested with a 7.5 kg bag (hanger printed in PLA).
All hangers from my collection are used daily by my kids and withstand all use cases.

!!NOTE!! The fotos uses color mixing 50% ivory white and 50% charcoal black for the two “e2” parts in Fox Base V2. Unfortunately, the 3mf file can only be uploaded without the color mixing unti the feature is fully released.

Please share photos of your prints in the comments.

Missing your favorite animal? Please leave a comment, i welcome ideas / suggestions for future or updated motives.

I try to design the models to use as less filament changes as possible to achieve the desired result. Color swaps are mostly in the bottom layers and color mixing (if any) is only applied within layers with color changes. Color mixing might be adjusted if colors are exchanged! All parts which might brake, like the hangers or noses designed as hangers, are not glued and are replaceable.
I print my motive hangers on an A1 and H2S to check the if tolerances work from different machines and prints. As most photos are shared with prints from a smooth PEI plate, textured PEI plate (and others) also works fine for all connectors.

Assembly:

Attach the hanger to the wall using screws or a small Tesa Power Strip (14.5mm x 33mm).

Insert the Fox Face into the Base and turn it clockwise.

Then slide the motive over the hanger until it snaps in.