1:1 DJI Inspire 3 model (fully optimized, fully articulated version)

The highly anticipated 1:1 full-scale blueprint for the DJI Inspire 3 is here!

A dynamic, playable 1:1 model of the Inspire 3 (can be scaled down if too large, not below 60% of the original size)

Perfectly separated parts, no AMS needed, details perfectly replicate the real machine

Easy to assemble, pre-plated, minimal supports and easy to remove

1. Magnetic memory compartment cover

2. Magnetic FPV camera (detachable and angle-adjustable)

3. Magnetic gimbal that replicates the real machine's 360°x9 fully articulated movement (detachable and angle-adjustable)

4. Replicated indicator light (luminous material)

6. Detachable battery

7. Rotatable motor (magnetic)

8. Arm can rise (without servo parts)

All components photo

9. Required materials

(1) Filament recommendation: Bambu Lab original PLA Basic silver + PLA Matte matte black

(2) Luminous material required for indicator light replication

(3) To replicate the carbon fiber arms, 1 meter each of outer diameter 25 and 20 is needed (refer to blueprint for dimensions, or directly print)

(4) Magnets*20 (size 20*2) + Magnetic sheets*5 (outer diameter 20)

10. Detailed assembly diagram below

Feel free to provide suggestions for modifications and optimizations in the comments section. I will consider them for improvements and release updates. Thank you for your support!

Attention! There are various pirated versions online recently, do not trust or purchase them (this is the latest version), support originality!