Fisher's Bandsaw Dust Shroud
Print Profile(1)
Description
This is an add‑on dust shroud for the Rikon 10‑324 14" open‑cabinet bandsaw. It encloses the lower area, directly under the surface around the throat plate, around the blade and guides, pulling the vacuum closer to where the dust is created and capturing far more than the stock port. It's two parts, a back wall and a front wall, that slide together are secured by 10mm x 2.3mm magnets. Additional spots for magnets are around the top edge that will assist in holding the shroud up against the bottom of the bandsaw surface. There's also an included wedge that can be used to securely keep the shroud in position. The dust port is for a standard 2 ½" hose. If you enjoy the print, consider giving it a BOOST! For more information on this shroud, and others, please watch the YouTube video:
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (9)