The Articulated Mangle 1:12 scale

This is a 1:12 scale action figure of The Mangle from Five nights at freddy's 2! It is fully articulated and can be posed well. It is easy to assemble with ball jointed pieces. Refer to the pictures or  instrcutions PDF to assemble. The print time is roughly 2 hour 30 minutes. 

Feel free to change or add to this model as long as you credit me too 🤩 🙏. If your are intersted in the other articulated  FNAF figurines, you can check out my other designs here! 

⚠️ WARNING: This is not an entry-level print. This is a project for those who have spent time fine-tuning their machines and understanding settings. 

• Interference Fit: All joints and connections are designed as interference fits (friction-fit). This means your tolerances must be spot-on. If your printer over-extrudes even slightly, parts won't fit; if it under-extrudes, the joints will be loose.
• Adhesion is Key: Because of the many thin contact points for each appendage, I highly recommend using a strong bed adhesive like glue stick or hairspray, even on PEI sheets.

Toy freddy: https://makerworld.com/en/models/2665502-toy-freddy-articulated-figurine-15-cm-1-12#profileId-2949368 

Toy Bonnie: https://makerworld.com/en/models/2570851-toy-bonnie-articulated-figurine-15-5-cm-1-12#profileId-2839531

Toy Chica: https://makerworld.com/en/models/2645464-toy-chica-articulated-figurine-15-cm-1-12#profileId-2923785

Endo 02: https://makerworld.com/en/models/2575140-endo-02-articulated-figure-13-cm-1-12#profileId-2839527