Ram 2500/3500 5th Gen 12"screen phone dash mount

I have further modified the file to fit the ram better. Mount sits lower, closer to the screen and has the Balls upsized to 1". You can print the ARMs from the other makes out here in maker world and there are also multiple adapters to size down from 1" to 17mm ball. 

To secure I found some screws laying around that matched the threads closely. They are 2.5" long. I checked the space below is hollow so don't worry about the screws being too long. 

I printed with supports ON, 3 layer walls, 15% gyroid fill, and .16mm wall height for higher strength/quality. printed in PETG.