PROJECT: Zed 's Shuriken - Life Size
Print Profile(1)
Description
This is a remix of Kikkia's shuriken with everything laid out on separate plates and recolored. This print profile also allows for easy support removal but I'll be so honest, I tried to do some fiddling around with the red blades but the supports are going to be a pain to remove no matter what.
The original design is meant to have LED strips within the blades but I am only using this for a wall mount and will not be putting LED strips but the option is still available for you. If you plan to use LED you should lower the walls from 4 → 2 on the blades so that the lights can shine through.
Material list
Red PLA
Blade PLA
Heat insert m2x4 9x (Blade and triangle base)
M3x3 6 (Blade connector to base)
M2x8 screws 6x (Blade)
M2x4 3x ( triangle base)
M3x20 3x (Blade connector to base)
M3x8 3x (Blade connector to base
Super Glue
Optional material list
LED strips
I THINK that all of the M2 screws mentioned above can be replaced with M2.5 and a heat insert is NOT needed. I did not have any on hand but it seemed like it was possible. Just increase the lengths by 2 mm if you want to use it.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)