Parametric Vase
Print Profile(1)
Description
Description
A vase for every occasion, from long necked, to wide based, and everything in between. Simply tweak the five separate parameters in the customizer or pick from one of my pre-generated presets. Each preset even tells you what settings I used to generate it. Now, some people have informed me that Maker Lab already provides a Vase Generator. However, I still publish this in hopes it'll bring something new to the Vase Generating Table.
Generation
GENERATIONS CAN TAKE A WHILE PLEASE BE PATIENT
By default the settings are TC (Top Curve) 20mm, BC (Bottom Curve) 25mm, TO (Top Offset) 10mm, BO (Bottom Offset) 30mm, CH (Curve Height) 80mm. TC adjusts the radius of the upper curve, and BC adjusts the radius of the lower curve. The limit of 10mm prevents the generator from making impossible to print overhangs, and radii above 50mm struggle to generate properly. TO sets how far in the upper curve is located, and BC does the same for the lower curve. The limits are there to prevent crossing over, and 90 degree overhangs from generating. Lastly, CH controls how low or high the curves are, the CH number is the height of the upper curve point. The lower curve point then controlled by dividing the value by 2. At a CH60 the lower curve is 30mm up and the upper curve is 60mm up. At a CH above 160 the upper curve point is beyond the top of the vase, this allows for single curve vases to be generated.
Size
Generated vases are always 150mm tall. Width can vary based on setting, from 60mm to 140mm. When scaling vases up/down be mindful of overhangs. I found that variable layer height, and the Arachne wall generator help prevent most overhang warnings.
Printing
It is reccomended that you use my print profile when printing your own custom generated vase. However, for those who don't have access to a computer the default Maker World settings should be decent, just don't come crying to me when they misbehave.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)