Stained Glass Flame Touch Night Lamp

This is a 3D printed decorative night lamp inspired by stained glass art, combined with colorful resin panels and a realistic flickering flame LED.
The lamp produces a soft, warm ambient light with a natural flame effect, making it perfect as a night lamp or a unique decorative piece.

The design is fully modular and easy to assemble, allowing customization of colors and patterns.

✨ Features:

• Touch sensor ON/OFF (TTP223 module)
• Realistic flickering flame LED effect 🔥
• Soft warm ambient light (perfect for night use)
• Stained glass style resin panels
• Modular and easy-to-assemble design
• Customizable colors and panel patterns

🧩 Components:

• TTP223 Touch Sensor

  https://s.click.aliexpress.com/e/_c4erDduJ

  https://s.click.aliexpress.com/e/_c4N58APv

• 2N2222 Transistor

  https://s.click.aliexpress.com/e/_c32PaP8R

  https://s.click.aliexpress.com/e/_c3c5xZ6x

• Resistors (1kΩ )

  https://s.click.aliexpress.com/e/_c3dwEr6x

  https://s.click.aliexpress.com/e/_c3qxyUNl

• Flame LED (3V–5V flickering type)

  https://s.click.aliexpress.com/e/_c3OXhwAR

• Battery holder (3× AA)

  https://s.click.aliexpress.com/e/_c30Dkph1

  https://s.click.aliexpress.com/e/_c3T0zTt1

• Wires AWG 24

  https://s.click.aliexpress.com/e/_c2yCSOYL

  https://s.click.aliexpress.com/e/_c4TJLWOP

   

   

🖨️ 3D Printing Settings:

• Material: PLA
• Layer height: 0.2 mm (0.12 mm for higher quality)
• Nozzle: 0.4 mm
• Supports: only for the roof part
• Infill: 10–15%

🎨 Resin Panels:

The panels are made using UV resin and transparent pigments to create a stained glass effect.

For best results:

• Use low-viscosity resin
• Remove air bubbles before curing
• Cure evenly under UV light

🔧 Assembly:

The lamp is designed for simple modular assembly.

👉 Full assembly tutorial is available here:
 

💡 Notes:

• Use a resistor in series with the LED if needed
• You can add a diffuser for softer light
• The design allows future upgrades (dimmer, RGB, etc.)