Pierce The Veil Hueforge
Print Profile(1)
Description
This is my first Hueforge, I made it for my Niece and wanted to share it with others.
Project: PTV_HueForge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 176.47x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Black Transmission
PLA BambuLab Scarlet Red Matte
PLA BambuLab Grey
PLA BambuLab White
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 swap to Scarlet Red
At layer #15 swap to Grey
At layer #20 swap to White for the rest.
Boost Me (for free)
If you Enjoy this please leave a rating, picture and always a boost :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)