Slider for SCX10 Copy fit Toyota comp Crawler Body
Print Profile(4)
Description
I designed this slider (body mount) to fit the SCX10 313MM COPY CHASSIS by 3D Designers onto the 1/10 Toyota Comp Crawler body made by jasonboz56. Inspired by
BigGazRC slider that he made for the scx10pro chassis.
With the first profile you will need to bolt the control arms from inside the frame.
The second profile has an extra hole to allow you to bolt it from the slider and use a nut or else.
It bolts to the chassis then the body simply slides and locks into place, no glue or magnets needed, as you can see in the pictures it bolts on the existing holes on the chassis and slides into the body.
Update 08/July/26:
Added a new print profile with sliders moving the body 6mm forward, added a new High clearance front bumper bracket and a few front and rear bumpers to suit the chassis when using these sliders.
"Moved the Bolts mounting points 6mm back on this print to allow the body to move 6mm forward to allow me to use the scx10 313mm aliexpress links on rear and front lower but had to use 2 of the short 89mm steering arm for front uppers on my setup.
I'm running a full drop setup with beluga factory tyres and 3d printed axles from thingverse atm(do not recommend printed axles on a crawler).
Also added a High clearance front bumper bracket to suit the SCX10 Copy Chassis and clear the steering servo while still allowing the body mount to work properly."
Also added the bumpers for the the first 2 sliders in here
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)