4x8 hueforge of Yamato from One Piece Anime
Print Profile(1)
Description
Boost Me (for free)
If you like my hueforges, please consider giving me a boost and a follow as it incentives me to make and upload more cool hueforges and you will be notified when i upload new models! Thank you and happy printing!
If you love my work, please consider dropping me a follow friends so you will be notified when i release new models!
If you want to sell physical copies of my prints, you are more than welcome to do so but you are required to subscribe to my patreon for commercial rights to sell physical copies of my works and you can do so with the following link, i also add new works daily or weekly onto makerworld (depending on how busy i am)
https://www.patreon.com/c/SBCCreations?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 100x200mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Blue Gray
At layer #10 (0.96mm) swap to Jade White
At layer #14 (1.28mm) swap to Red for the rest.
Please share your pictures of your prints i would love to see how they came out and happy printing friends!
The frames i use for ALL my hueforges are amazing and are not my own design at all and i take no credit at all, all credit for them go's to Canadian gamer and they can be found here!
https://makerworld.com/en/models/1083539-desktop-hueforge-frame#profileId-1199615
And if i want to hang them i just super glue one of these to the back of the frame, and this is also not my design and i take no credit for it, all credit go's to the creator of the model!
https://makerworld.com/en/models/840217-wall-mount-for-hueforge#profileId-807756
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)