3/4" Female Hose Barb Set Ø6–28 mm

🔧 Description

Set consisting of 3/4'' female 3D Printed hose barb fittings, designed to connect hoses of different diameters with good compatibility with standard fittings

The project was prepared with multi-profile files + separate individual models for each diameter (the indicated measurement refers to the internal diameter of the hose to be connected), so you can:

• print all fittings in a single print
• print only what you need
• avoid manual modifications to the plate
• quickly choose the most suitable diameter for your hose

The package includes the following measurements referring to the internal diameters of the hose to be connected:

Ø6 mm
Ø8 mm
Ø10 mm
Ø12 mm
Ø14 mm
Ø16 mm
Ø18 mm
Ø20 mm
Ø22 mm
Ø24 mm
Ø26 mm
Ø28 mm

Ideal for:

• water or air hose connections
• irrigation systems
• workshop and DIY
• tests and prototypes
• quick adaptations on existing systems

✔ Thread compatible with GAS/BSP 3/4'' female hydraulic standard
✔ Complete set with hose diameters from Ø6 to Ø28 mm
✔ Multiple files for single or complete print
✔ Geometry optimized for FDM printing
✔ Simple, compact, and robust structure
✔ Useful for quick connections, tests, and adaptations

The hose insertion area is designed with spaced hose barb profiles (barbs), designed to:

✔ improve grip on the hose
✔ reduce the risk of slippage under pressure
✔ allow correct tightening of the clamp, which can work between the teeth without deforming the fitting

This geometry ensures a more stable and secure attachment even with soft hoses

⚠️ Printing Notes

To ensure reliable printing, the models include supports and small outer brim

✔ The supports are structural and necessary to correctly support the geometry during printing
✔ They are designed to ensure stability and good surface quality in critical areas

✔ There are also small internal brim, designed to:

• improve bed adhesion
• reduce the risk of detachment during printing
• increase stability, especially in larger diameter parts

👉 After printing, it is necessary to remove supports and brim
👉 The supports are optimized for easy removal without compromising the part

After numerous tests, complete removal of supports did not allow for maintaining adequate model quality
For this reason, they have been optimized and maintained to ensure precision, stability, and a better final result

⚠️ Caution

Not suitable for high pressure, hot water, or critical systems
To improve sealing, the use of PTFE tape (Teflon) is recommended when necessary

📐 TECHNICAL SPECIFICATIONS

Type: female hydraulic hose barb fittings
Thread standard: GAS / BSP
Thread: 3/4'' female
Internal diameters of hose to be connected: Ø6 – Ø28 mm (2 mm step)
Configuration: multi-profile + single models
Recommended technology: FDM printing
Recommended materials: PLA / PETG / ASA / ABS

🔧 Other versions available:

👉 1/2" Male Set Ø6–24 mm
https://makerworld.com/en/models/2687519-hydraulic-fittings-1-2-m-hoses-o-inner-6-24-mm#profileId-2977271
 

👉 1/2" Female Set Ø6–24 mm

https://makerworld.com/en/models/2717745-plumbing-fittings-1-2-f-pipes-with-6-24-mm-interna#profileId-3010208

👉 3/4" Male Set Ø6–28 mm

https://makerworld.com/en/models/2747643-3-4-male-hose-barb-adapter-set-o6-28-mm-bsp#profileId-3047923

🧾 Note

As with the other models in my collection, these fittings have also been tested with commercial components and designed to be practical, printable, and useful in technical, hobby, and workshop contexts

Vuoi offrirmi un caffè? Puoi farlo qua