Last Year's Snow Was Falling (Soviet Cartoon)
Print Profile(1)
Description
Iconic peasant character from the 1983 Soviet claymation classic "Падал прошлогодний снег" ("Last Year's Snow Was Falling"), forever shouting his catchphrase "Маловато будет!" ("Not enough!") on a snow-covered base — split across 5 plates for clean multicolor printing on Bambu Lab P1S + AMS.
Description
A loving 3D tribute to one of the most quoted scenes in Soviet animation. The little man in the green caftan and fur hat stands in the snow with his axe and magic wand, next to a fir tree, demanding more — “Маловато бу-у-удет!”
What's on each plate
| Plate | Part | Notes |
|---|---|---|
| 1 | Base + engraved text | Snow-style platform with "Маловато будет!" lettering |
| 2 | Fir tree | Detailed mesh, supports recommended |
| 3 | Figure (the man) | Multi-color body, beard, hat, hands |
| 4 | Axe | Tiny part, prints fast |
| 5 | Wand | Even tinier — easy to lose, print 2 |
After printing, parts assemble into a single static diorama
Print settings used
- Printer: Bambu Lab P1S
- Nozzle: 0.4 mm
- Layer height: 0.08 mm (Fine — for facial detail and text crispness)
- Infill: 15% Gyroid
- Supports: Tree (auto) — needed on Figure, Tree and Axe
- Slicer: Bambu Studio
Filaments used (project file)
The project is set up for AMS multicolor. Filaments referenced:
- Bambu PLA Basic — White, Green, Black
- Bambu PLA Matte — Pink, Red, Yellow
- Bambu PLA Silk+ — Gray, Yellow
- Bambu PLA Wood — Brown (#4F3F24) for the hat / beard / axe handle
- Bambu ABS — Black (small accents)
- Bambu Support For PLA — interface layers
You don't need every spool — swap in your own equivalents. The wood-fill PLA gives a really nice fuzzy look on the fur hat and the wooden axe handle, highly recommended if you have it.
Tips
- Orient as provided — plates are already laid out for minimal supports.
- Glue stick or smooth PEI for plate 1 (base) — large flat surface.
- The text on the base is engraved in the original Cyrillic font (Ink Free style). If your slicer flips it, double-check before printing.
- Total estimated print time at 0.08 mm: ~30 hours across all plates.
Credits & licensing
- Character design © original creators of "Падал прошлогодний снег" (Soyuzmultfilm, 1983) — non-commercial fan tribute only.
- Please do not sell printed copies — fan project, share for the love of the cartoon.
License
Comment & Rating (0)