Cross-Stitch Keychain - Health Potion

This functional, double-sided cross-stitch keychain is designed with technical precision in mind. This model is engineered specifically for a 0.4mm nozzle to ensure the cleanest possible print with zero wasted movement.

• Hole Size: 1.26 mm (exactly 3 wall lines).
• Gap/Bridge: 0.84 mm (exactly 2 wall lines).
• Stitch Pitch: 2.1 mm (approx. 12 Count equivalent).

By matching these dimensions to a 0.42mm line width, the printer performs a continuous path with minimal retractions. This results in maximum print speed and superior surface quality without the typical "blobs" or "strings" found in small holes.

Assembly Instructions

• Stitch your designs on both halves of the keychain.
• Align the two halves back-to-back (wrong sides together).
• Carefully glue the pieces together to create a clean, double-sided accessory.

Print Settings

• Nozzle: 0.4 mm (Required for the geometry to match).
• Line Width: 0.42 mm.
• Line first layer: 0.42 mm.
• Layer Height: 0.2 mm recommended.