Sinuosity 14 - Abstract Wall Art

The series of beautiful geometric figures continues (check my profile for other models). 

This image is an abstract illustration in line art style that combines fluid and organic lines. The lines resemble the movement of water or the fins of fish like Betta or Koi fish. In some contexts, it is considered an esoteric symbol representing the connection between humans and natural elements. The style is modern, minimalist, and inspired by nature.

A decorative hanging piece to enrich the aesthetic of interior spaces. A piece of modern abstract art designed to add movement and elegance to an environment. 

Ideal for living rooms, offices, or entryways as a decorative focal point.

Printed in black SUNLU PLA. Printing is very easy and consumes only 16 grams of filament (2 millimeters thick).

Colors can be changed from the slicer at the time of printing; the model can be enlarged or reduced as desired. Usually 2 mm thickness is more than sufficient. So if you enlarge it on the x and y axes, keep the 'Uniform Scale' function active, then to vary the thickness, uncheck 'Uniform Scale' and act only on the value of the z-axis, which you will set to the desired millimeters (I set 2 mm and it works perfectly). 

It does not require an additional assembly process and can be hung with small nails or double-sided tape.

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small precautions, along with many others, are what determine the success of a good print..

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to experience problems, do not hesitate to contact me; we will work together to find solutions in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, or wet or poor-quality filaments, don't blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Infill 15%

• Grid pattern

• No supports

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration speed 10000 mm/s

• Outer wall acceleration speed 10000 mm/s