OG Potato Cannon

No one has made just a normal potato cannon like you would get with pvc pipe and cementing them together like the good ole days. So to fix that issue, here we go. Designed to 2 that will use your standard stick lighter ignitor. The “All in one” is designed to simply be 2 pieces. The “Over Engineered” and other two are the same concept for the chamber just with a little less manual work to be done, minus the size of the cannon's barrel. made this to be printed as 3 parts to be able to maximize customizability. If you want a longer/shorter barrel length just cut it from your slicer and you good to go. If you want the bore to be wider or more narrow just add a hollow cylinder to the model, cut and size to fit, and mesh them together. 

Tested with 91% isopropyl alcohol and works fine and dandy, and is fun to shoot. “Play” accepting your own risk, I do not claim responsibility for any actions that may or may not occur should you decide to print and make these models functionable.