Mil"Hawk"ee Spittoon/Spitter

This container is the origination of the Mil"hawk"ee Container V1 and was designed to be a spittoon/spitter and with a open cap design.  It is the same size as a regular 16 oz or 500 ml energy drink can so that it is easy to carry, fits almost all cup holders and is easy to use.  

This is a project meant to span multiple iterations, improvements, redactions, and hopefully come up with a final product that is just all around useful, customizable, and most of all, enjoyable both to create and to use.  

This model utelizes a solid container with a tpu seal and a tpu insert to increase water resistance.

If your printer is dialed in, this model shouldnt need the tpu insert to remain water resistant but the seal is at least highly recommended.  If you have trouble installing the seal, usually the textered (print plate) side will insert easier.  Using a Superlube or silicone grease or oil on the threads will also make initial threading much smoother.  

PLEASE WAIT UNTIL FULLY COOLED BEFORE PUTTING TOGETHER OR THREADING TOGETHER.

P.S. This project also works great with PETG as well as with 10 walls, and 100% infill for increased strength and durability impact resistant and premium feel with both PLA and PETG