relaxed seagull on the bench

Update 15.05.2026

As you can already see in the pictures above 

❤️ Seagull Paul has met his Pauline ❤️

We have added a companion

We have uploaded two print profiles, one for the Bambu Lab H2C and one for normal printers (P1S, P2S, A1 etc)

Size:

approx. 7.8 cm x 7.3 cm x 13.4 cm

Here we have a seagull sitting very relaxed on the bench as maritime decoration

The bench has anchors as decoration on the sides

We thought long and hard about uploading this model, the print takes quite a long time but the result speaks for itself

In the last picture you can see what the seagull looks like in a single color

For those who can paint well, I recommend the single-color print of the seagull. This only takes about two hours

Material: PLA Matte Milk Coffee Brown, Nardo Grey, Ivory White, Navy Blue, Mandarin Orange

Printer: Bambu Lab P1S 

Size:

Bench approx. 21 cm x 7 cm x 10 cm

Seagull approx. 9 cm x 9 cm x 16 cm

The tolerances are chosen so that everything can be easily put together. However, depending on the filament and manufacturer 

small differences may arise due to different shrinkage

If you like our design please leave a like

If you like our work please support us with a Boost

Many thanks to all of you for your support

Sometimes we don't manage to comment on reviews, it has become so much

and we are incredibly grateful to you. We won't forget you, it just takes a little longer to reply

because it's our hobby and we don't always have time everywhere

❤️❤️❤️ 

Please don't forget to rate the print profiles. Thank you very much

Here is my Instagram Account

https://www.instagram.com/kann_nix_printdesign?igsh=djdrN2p3NXUxbW9t&utm_source=qr

Check back regularly, I will regularly post previews of new prints there

Thank you very much for your support

and have fun printing