Mountain bike suspension fork Bottle/dryback cage
Print Profile(1)
Description
Universal Suspension Fork Bottle/Cargo Cage Mount
Elevate your bikepacking setup with this 3D-printable cage system designed specifically for mountain bike suspension forks. This mount allows you to carry up to 1L of water or gear securely on your fork lowers.
Features
- Rock-Solid Mounting: Designed for use with Manitou (and similar) suspension forks. (42.5mm diameter, let me know if you need other diameter rings) without inlets for the screws/bolts
- High Strength: Optimized internal structural geometry.
- Heat-Set Ready: Uses M4 heat-set inserts for a professional, durable connection that won't strip like plastic threads.
- Strap Compatible: Designed specifically to work with FixPlus or similar TPU straps for maximum grip.
Technical Specifications & Hardware
Securing bolts
- 8x M4 Heat-Set Inserts
Short Bolts
- 6x M4 Bolts (approx. 18mm)
Long Bolts
- 2x M4 Bolts (cut to fit your specific fork diameter) around 50mm
Padding
- Foam tape or rubber strip (inner tube) to protect fork paint and secure ring in place
Assembly Notes
- Prep: Press the M4 heat-set inserts into the pre-modeled holes on the holder.
- Protect: Apply a layer of foam tape or a thin rubber strip to the inside of the suspension rings to prevent sliding and protect your fork’s finish.
- Install: Clamp the rings around the fork lowers. Ensure the mount is positioned so it does not interfere with the tire or the brake rotor.
- Security: Always check bolt tightness after your first ride, especially in changing temperatures.
Tested in Winter 2026 conditions over several months. Holds up to a 1L insulated bottle with zero slippage/problem. Design has internal channels which make desing bit more robust after slicing. Uplaoded profile has slicing finetuned for maximal strength. Test version printed with Bambu PETG-HF (was better than CF insufed one). Annealing not suggested for this model as it makes it too brittle.
If you like this design, please upload a make and let me know what fork you mounted it on!
License
Comment & Rating (3)