Replacement foot for Foppapedretti "IlSediolone"

Model Description

Context & Problem

The plastic feet on the Foppapedretti "IlSediolone" high chair tend to wear out, crack. 

Design Details

This model faithfully replicates the shape and function of the original foot. It fits perfectly onto the chair leg and a solid base on the floor. ABS provides the necessary strength and durability for long‑term use.

Print Instructions & Materials

Recommended Material

Use ABS for this replacement part.

ABS is tough, impact‑resistant, and handles everyday wear better than PLA or PETG. 

Suggested Print Settings

• Material: ABS or PETG
• Layer height: 0.2 mm
• Infill: 30% (gyroid or cubic)
• Walls: 3
• Number of copies: The STL file contains a single foot. Slice one copy, print it, and you're done. If you need multiple feet, duplicate the part in your slicer.