Sinuosity 10 - Abstract Ginkgo Wall Art

The series of beautiful geometric figures continues (check my profile for other models). 

Add natural elegance and depth to your walls with this decorative wall panel featuring ginkgo biloba leaves, to be used as a modern and botanical furnishing element. 

The piece is characterized by fluid lines that create a dynamic and organic effect on the wall. It is a contemporary design piece, ideal for adding an artistic touch to living rooms, offices, or entrances.

When hung, they appear to float, creating a 3D effect on a white or light background. 

Printed in black SUNLU PLA. Printing is very easy and only consumes 28.87 grams of filament (1.69 millimeters thick).

Colors can be changed from the slicer at the time of printing, and the model can be scaled up or down as desired. Usually, 2 mm thickness is more than sufficient. So if you scale it up on the x and y axes, keep the “Uniform Scale” function active, then to vary the thickness, uncheck “Uniform Scale” and only adjust the z-axis value to your desired millimeters (I used 1.36mm and it works perfectly). 

It does not require additional assembly and can be hung with small nails or double-sided tape.

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then dry it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. It is these small precautions, along with many others, that determine the success of a good print.

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; we will look for solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, damp or poor quality filaments, do not blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm
• Initial layer height 0.2 mm
• Wall loops 2
• Top shell layers 5
• Bottom shell layers 3
• Infill 15%
• Infill pattern Grid
• No support
• Outer wall speed 200 mm/s
• Inner wall speed 300 mm/s
• Normal print acceleration speed 10000 mm/s
• Outer wall acceleration speed 10000 mm/s