Rococo CHESS SET

Rococo CHESS SET

I printed them, the tallest figure is ~95mm, the rest are correspondingly smaller. 
Of course, you can scale them up to make them even bigger, they'll look even nicer :)

The models have a lot of details and small elements, you have to remove the supports carefully, but I think the effect is worth the time spent.

A 0.2mm nozzle would definitely be useful for these models.

Playing with colors :) But seriously, I just had some leftover filaments and decided to use them up.
Professional Lab PLA+ 1.75mm 1kg (Grey)
eSUN High Speed PLA+ filament (Bone White)
eSUN High Speed PLA+ filament (Cool White)

*0.12mm High Quality @BBL A1; 0.4 nozzle; 3 walls, 95% infill

I publish my models only on the MakerWorld.com platform.

Happy printing!
 

To print my models before posting them on MakerWorld, 
I use the BambuLab A1 and P2S printer + the [BIQU Panda Buildplate CryoGrip] and [BIQU Panda Buildplate CryoGrip Pro Frostbite] plate, 
which has much better adhesion than standard PEI. 
Remember to make sure before you start printing that your plate is ready for printing, it should be clean and degreased.


The models are so detailed that you need to be careful when removing supports for small elements (e.g., hands, fingers). Of course, this problem is significantly minimized when printing at a larger scale. Remember to exercise extreme caution.

Make sure the print profile is adjusted to the filament you're currently printing with. 
Remember to adjust the print parameters to the filament you're printing with. 
Even regular PLA requires different print parameters, especially the Silk or Matte PLA versions. 
Also, make sure your filament is properly calibrated to ensure smooth prints.